Tips & guides · Designed with Light · 5 min read

What Architects Should Include in a Lighting BOQ A useful BOQ helps everyone compare the same requirement, avoid substitutions and install the intended result.

A lighting BOQ is often treated as a list of quantities and wattages. That may be enough to start a discussion, but it is rarely enough to make confident comparisons between products—or to protect the lighting intent through procurement and installation.

Two fixtures can share a headline wattage and still differ in distribution, physical size, colour quality, controls and maintenance requirements. If those differences are not written down, the person sourcing the fittings is left to make assumptions.

A useful BOQ is not necessarily longer. It is specific about what matters.

Define the application first

For each line item, record the space or zone, the intended use and the basic lighting function. Is the fitting providing general illumination, accent light on a wall, task light over a counter or a decorative focal point?

A description such as “recessed COB for living room feature wall” offers more design context than “COB 12W,” but it still needs technical detail before products can be compared.

A practical BOQ field checklist

FieldWhy it matters
Fixture type and applicationClarifies the intended role of the fitting
Quantity and location referenceConnects the BOQ to drawings and spaces
Mounting methodDistinguishes recessed, surface, suspended and track solutions
Physical dimensions and cut-outSupports ceiling/joinery coordination
Input power and luminaire light outputEnables informed performance comparisons
CCT and colour-rendering requirementsHelps control the appearance of light and finishes
Beam angle or photometric distributionKeeps focused and diffused options from being confused
Finish, trim and appearanceProtects visible design decisions
Driver and control requirementsPrevents incompatible dimming or switching assumptions
Environmental rating where applicableChecks suitability for the actual exposure conditions
Installation and maintenance requirementsSupports access, coordination and serviceability
Approved reference/datasheet revisionEnsures the comparison uses the same current technical information

Not every project needs every field at the same depth. A decorative pendant may require more attention to suspension, appearance and finish than a simple utility light. A façade fixture may demand far more environmental and optical documentation. The schedule should be tailored to the risk and design intent.

Don't leave the drawings disconnected

A BOQ should refer clearly to reflected ceiling plans, sections, elevations and fixture tags. Without that connection, a supplier may quote a technically plausible fitting that cannot be installed in the allocated space.

For example, a recessed source may meet a brightness requirement but need a larger cut-out than the site can accommodate. A surface-mounted alternative may work electrically while breaking a flush architectural detail.

Separate approved equivalents from guesses

Substitutions happen. They may be reasonable because of lead times, design revisions or availability. The important thing is to agree on the performance and appearance criteria that any equivalent must satisfy.

“Equivalent” should not mean “similar wattage.” Compare output, distribution, colour quality, mounting, dimensions, controls and the visible finish. For more demanding applications, review photometric information and a physical sample where practical.

A supplier's model code must never be silently treated as a separate internal SKU. Keep the manufacturer's reference traceable to its source document and revision.

Coordinate controls and drivers early

An apparently simple lighting line item can depend on a specific driver, compatible dimming method or system power component. State the required control behaviour and the intended interface. If the design asks for dimming or tunable light, verify which exact combination supports it.

This is particularly important for linear lighting, magnetic track systems and larger groups of linked fixtures. Quantities of accessories, feeds and connectors should follow the selected system's technical documentation.

Finish with an approval trail

Record which options are proposed, reviewed and approved, and who made the decision. Maintain the latest datasheet and drawing references. Document finish samples when appearance is critical. Where availability changes, treat it as a fresh selection decision rather than an automatic like-for-like replacement.

A note on the approval column

A status label such as Proposed, Technically Reviewed, Approved for Procurement or Installed as Approved can prevent confusion. Attach the responsible reviewer and revision date. If an equivalent is later substituted, the previous approval does not automatically carry over.

When a project is split across several suppliers or installers, this small record becomes particularly valuable. It separates a discussion from a confirmed decision.

A good BOQ reduces the number of conversations that begin, “We thought this was the same product.” It gives the architect, buyer, installer and supplier a shared definition of the result being purchased.

Explore the lights: Architectural lighting · Product catalogue

Have a lighting requirement? Ask us on WhatsApp.

Let's talk about your space

Every great lighting idea
starts with a conversation.

Share a product requirement, project brief or BOQ with TLG's Pune team.

Start an enquiry
WhatsApp